Barcode Giant About us | Customer service | Government | Shopping cart shopping cart
Free Shipping! $Low Prices. Guaranteed! Free Tech Support!
Call 1-888-875-7170
Photo of Cisco AIR-AP1242AG-A-K9 Cisco logo

Cisco Aironet 1200 Series

1242 Access Point (802.11ag Non-Modular IOS AP RP-TNC, FCC Configuration)

$472.89

Free Shipping

Ships Today

 

Cisco Aironet 1200 Series Access Point

The Cisco Aironet 1200 Series Access Point is a single band lightweight or autonomous access point with dual diversity antenna connectors for challenging RF environments. It offers the same versatility, high capacity, security, and enterprise-class features demanded by industrial wireless LAN customers in a single-band 802.11g solution. The Aironet 1200 Series modular device provides the flexibility to field upgrade to a dual-band 802.11a/g network by adding a CardBus-based 802.11a upgrade module that can be easily installed into Cisco Aironet 1200 Series access points originally configured for 802.11g. The device is available in either a lightweight version, or as an autonomous version that may be field-upgraded to lightweight operation.

Full specifications (PDF)

Manufacturer part number: AIR-AP1242AG-A-K9

Technical Information

  • Wireless LAN Standard:
    • IEEE 802.11a/b/g
    • IEEE 802.11a/b/g
  • ISM Band:
    • Yes
    • Yes
  • UNII Band:
    • Yes
    • Yes
  • Indoor Antenna Range:
    • 460 ft
    • 460 ft
  • Outdoor Antenna Range:
    • 950 ft
    • 950 ft
  • ISM Minimum Frequency:
    • 2.41 GHz
    • 2.41 GHz
  • UNII Minimum Frequency:
    • 5.15 GHz
    • 5.15 GHz
  • Antenna Gain:
    • 2.2 dBi
    • 3.5 dBi
    • 2.2 dBi
    • 3.5 dBi
  • Antenna Type:
    • Diversity Dipole Antenna
    • Omnidirectional Antenna
    • Diversity Dipole Antenna
    • Omnidirectional Antenna
  • Total Number of Antennas: 2
  • Wireless Transmission Speed:
    • 54 Mbps
    • 108 Mbps
  • ISM Maximum Frequency:
    • 2.40 GHz
    • 2.46 GHz
  • UNII Maximum Frequency:
    • 5 GHz
    • 5.83 GHz
  • Antenna Connector:
    • RP-TNC Connector
    • RP-TNC Connector
  • Wireless Security:
    • UL 60950
    • UL 2043
    • CSA
    • WPA
    • WPA2
    • 802.11i
    • 802.1x
    • TKIP
    • AES
    • WPA
    • WPA2
    • TKIP
    • AES

General Information

  • Product Type:
    • Wireless Access Point
    • Wireless Access Point
  • Product Series:
    • 1240AG
    • 1240AG
  • Brand Name:
    • Cisco
    • Cisco-IMSourcing
  • Manufacturer:
  • Product Name:
    • Aironet 1242AG Access Point
    • Aironet 1242AG Wireless Access Point
  • Product Line:
    • Aironet
    • Aironet
  • Product Model: 1242AG

Physical Characteristics

  • Height:
    • 1.1"
    • 1.1"
  • Depth:
    • 8.5"
    • 8.5"
  • Form Factor:
    • Desktop
    • Ceiling Mountable
    • Desktop
    • Ceiling Mountable
  • Weight (Approximate):
    • 2 lb
    • 2 lb
  • Width: 6.6"

Interfaces/Ports

  • Fast Ethernet Port:
    • Yes
    • Yes
  • Management Port:
    • Yes
    • Yes
  • Ethernet Port: Yes
  • Gigabit Ethernet Port: No
  • 10Gigabit Ethernet Port: No
  • PoE (RJ-45) Port: No
  • USB: No
  • HDMI: No
  • VGA: No
  • Audio Line Out: No
  • Serial Port: No
  • Network (RJ-11): No
  • Powerline: No

Other

  • Package Contents:
    • Aironet 1242AG 802.11a/b/g Wireless Access Point
    • Cisco Aironet 1240AG Series Power Module (universal power module)-optional
    • Quick Start Guide: Cisco Aironet 1240AG Series Access Point
    • Safety Warnings for Cisco Aironet 1240AG Series Access Points
    • Cisco product registration and Cisco documentation feedback cards
    • Mounting hardware kit:
    • One mounting plate with cable security bracket
    • Two suspended ceiling T-rail clips, spacers (accommodates standard and recessed T-rails), and nuts
    • One security hasp
    • Two 6 x 32 x 1/2 in. pan head Phillips machine screws
    • Four 8 x 18 x 3/4 in. pan head Phillips sheet metal screws
    • Four #8 plastic wall anchors
    • One 10 x 24 nut (for ground stud on mounting bracket)
    • Four rubber foot pads
    • Two cable tie wraps
    • Aironet 1242AG 802.11a/b/g Wireless Access Point
    • Cisco Aironet 1240AG Series Power Module (universal power module)-optional
    • Quick Start Guide: Cisco Aironet 1240AG Series Access Point
    • Safety Warnings for Cisco Aironet 1240AG Series Access Points
    • Cisco product registration and Cisco documentation feedback cards
    • Mounting hardware kit:
    • One mounting plate with cable security bracket
    • Two suspended ceiling T-rail clips, spacers (accommodates standard and recessed T-rails), and nuts
    • One security hasp
    • Two 6 x 32 x 1/2 in. pan head Phillips machine screws
    • Four 8 x 18 x 3/4 in. pan head Phillips sheet metal screws
    • Four #8 plastic wall anchors
    • One 10 x 24 nut (for ground stud on mounting bracket)
    • Four rubber foot pads
    • Two cable tie wraps
  • Certifications & Standards:
    • Wi-Fi
    • UL 60950
    • UL 2043
    • IEEE 802.11a
    • IEEE 802.11b
    • IEEE 802.11g
    • IEEE 802.3
    • IEEE 802.3af
    • IEEE 802.11i
    • IEEE 802.1x
    • Safety:
    • UL 60950-1
    • CAN/CSA-C22.2 No. 60950-1
    • UL 2043
    • IEC 60950-1
    • EN 60950-1
    • NIST FIPS 140-2
    • Radio Approvals:
    • FCC Part 15.247
    • RSS-210 (Canada)
    • EN 300.328
    • EN 301.893 (Europe)
    • ARIB-STD 33 (Japan)
    • ARIB-STD 66 (Japan)
    • ARIB-STD T71 (Japan)
    • AS/NZS 4268.2003 (Australia and New Zealand)
    • EMI and susceptibility (Class B)
    • FCC Part 15.107 and 15.109
    • ICES-003 (Canada)
    • VCCI (Japan)
    • SRRC (China)
    • EN 301.489-1 and -17 (Europe)
    • EN 60601-1-2
    • IEEE Standards:
    • 802.11a
    • 802.11b
    • 802.11g
    • 802.3
    • 802.3af
    • 802.11i
    • 802.1x
  • Additional Information:
    • Software: Cisco IOS Software Release 12.3(7)JA or later
    • Memory: 32 MB RAM, 16 MB flash
    • Processor: IBM PowerPC405 (200 MHz)
    • Two RP-TNC connectors 802.11g or 802.11a approved
    • Provides Link Role Flexibility when running Cisco IOS Software
    • Can be powered by 802.3af PoE, Cisco inline power switches, single port power injectors, or local power

Management & Protocols

  • Management:
    • Telnet
    • Console port management
    • Trivial File Transfer Protocol (TFTP)
    • CiscoWorks Campus Manager
    • CiscoWorks CiscoView
    • CiscoWorks WLSE
    • CiscoWorks Wireless LAN Solution Engine (WLSE)
    • Simple Network Management Protocol (MIB I and MIB II)
    • CiscoWorks Resource Manager Essentials (RME)
    • CiscoWorks Software Image Manager (SWIM)
    • Web Based Management

Warranty

  • Limited Warranty: 1 Year
  • Additional Warranty Information:
    • Product does not ship from original manufacturer
    • Product may not be eligible for original manufacturer warranty, rebates or programs
    • Direct replacement warranty provided by Ingram Micro (1 year for components, 3 year for systems)
    • Product ships from IMSourcing facility within 2-3 days or from stock
    • Product may ship in non-standard packaging
    • All returns processed directly from IMSourcing
    • Product condition subject to availability
    • Replacement parts are from our Service inventory and meet our rigorous inspection and quality standards. Some will be new, some are manufacturer certified refurbished, some are considered 'as new' and have been tested, refurbished or remanufactured. All are fully warranted
    • Where applicable, -IM indicates an Ingram Micro certified pre-owned product

Power Description

  • Input Voltage:
    • 110 V AC
    • 220 V AC
    • 48 V DC
  • Power Source:
    • Power Supply
    • AC Adapter
    • PoE
Customer Service
· Shipping Rates and Times
· Returns
· Payment Options
Contact
· Phone 1-888-875-7170
· Fax 1-888-549-4342
· customerservice@barcodegiant.com
· Se Habla Español
About Us
· About Barcode Giant
· Satisfied Customers
Google Wallet Accepted Amazon Payments Nextag Trusted Seller Become.com Trusted Merchant Norton Secured
©2014 Barcode Giant