IEEE 802.3z 1000BASE-LX standard<br><br> Regulatory
and Standards Compliance:
Safety - Laser Class I 21CFR1040
System Requirements: Mode-conditioning patch
cord (CAB-GELX-625 or equivalent) is required. Using an ordinary
patch cord with MMF, 1000BASE-LX/LH GBICs, and a short link
distance (10s of meters) can cause transceiver saturation resulting
in an elevated bit error rate (BER). In addition, when using the
Cisco 1000BASE-LX/LH GBIC with 62.5-micron diameter MMF, you must
install a mode-conditioning patch cord between the GBIC and the MMF
cable on both the transmit and receive ends of the link. The
mode-conditioning patch cord is required for link distances greater
than 984 feet (300 m).
Additional Information:
Transmitter output power (minimum/maximum): -3/-9.5 dBm
Receiver maximum input power: -3 dBm
Receiver sensitivity: -19 dBm
50 micron MMF: 4.4 dB
62.5 micron MMF: 6 dB
9 micron SMF: 6.5 dB<br>
Contains a Class 1 laser of 1300 nm for 1000BASE-LX/LH
(long-wavelength) applications.<br><br> Connector
polishing:
Super Physical Contact with a 20 micron radius
Media & Performance
Data Transfer Rate:
1 Gbps Gigabit Ethernet
1 Gbps Gigabit Ethernet
Connectivity Media:
50 µm Multi-mode Optical Fiber
62.5 µm Multi-mode Optical Fiber
8.3/9/10 µm Single-mode, Long Haul Optical Fiber
8.3/9/10 µm Single-mode, Long Haul Optical Fiber
1000Base-LX/LH
Distance Supported:
1804 ft 62.5 µm Optical Fiber
1804 ft 50.0 µm Optical Fiber
6.20 Mile 8.3/9/10 µm Optical Fiber
Warranty
Limited Warranty: 90
Additional Warranty Information:
Product does not ship from original manufacturer
Product may not be eligible for original manufacturer warranty,
rebates or programs
Direct replacement warranty provided by Ingram Micro (1 year
for components, 3 year for systems)
Product ships from IMSourcing facility within 2-3 days or from
stock
Product may ship in non-standard packaging
All returns processed directly from IMSourcing
Product condition subject to availability
Replacement parts are from our Service inventory and meet our
rigorous inspection and quality standards. Some will be new, some
are manufacturer certified refurbished, some are considered 'as
new' and have been tested, refurbished or remanufactured. All are
fully warranted
Where applicable, -RF indicates an Ingram Micro certified
pre-owned product