Intermec PB2 Portable Printer

The ideal companion to Intermec worldclass mobile computers and scanners, the PB2 mobile two-inch printer interfaces seamlessly via Bluetooth or 802.11g with the CN3 and 700 Series handheld computers, as well as with the new Intermec CK3. The PB2 also has the ability to print from a wide range of handheld devices and smart phones to produce receipts on demand. Available with optional card reader, the PB2 gives workers the flexibility to accept payments via their mobile computer or their printer. Either way, the combination supports increased productivity and customer satisfaction, enabling workers to process payments on the go and generate receipts immediately.
Questions?
1-888-875-7170
We respond to every email

Print Resolution ?

Print Method ?

Interface Options

Maximum Print Width ?

Printer Type ?

PB2 Options
Part # DescriptionAvailabilityPriceOrder
PB2A020E PB2, Direct thermal printing, 203 dpi, 2 ips, 2" width, RS-232 serial and Bluetooth interfaces, 1MB RAM/4MB Flash. Includes battery, AC charger, belt clip, media roll and cleaning pen. Ships Free Today $377.97
Retail $699
Save 45%
PB2A030E PB2, Direct thermal printing, 203 dpi, 2 ips, 2" width, RS-232 serial and 802.11b wireless interfaces, 1MB RAM/4MB Flash and magnetic stripe reader. Includes battery, AC charger, belt clip, media roll and cleaning pen. Check Availability Call for Details
PB2A021E PB2, Direct thermal printing, 203 dpi, 2 ips, 2" width, RS-232 serial and Bluetooth interfaces, 1MB RAM/4MB Flash and magnetic stripe reader. Includes battery, AC charger, belt clip, media roll and cleaning pen. Check Availability Call for Details
PB2A020C PB2, A, Bluetooth-V, RS-232, NO READER, ENG/CHI (SIMP) Check Availability Call for Details
PB2A010E PB2, A, IrDA, RS-232, NO READER, ENG/LAT Check Availability Call for Details

Intermec PB2 Details

Environment

Operating Temperature: 
-10°C to 50°C (14°F to 122°F)
Storage Temperature: 
-20°C to 60°C (-4°F to 140°F) without battery
Humidity: 
Operating humidity: 20% to 85% non-condensing 
Storage humidity: 5% to 95% non-condensing
Rain and Dust Resistance: 
IP54 with optional environmental case
Drop Spec: 
Survives 1.5m (5 ft.) drop to concrete 

Physical Characteristics

Length: 
PB2: 138.58 mm (5.46 in) 
PB3: 156.10 mm (6.14 in)
Width: 
PB2: 103.23 mm (4.06 in) 
PB3: 127.20 mm (5.01 in)
Height: 
PB2: 60.96 mm (2.40 in) 
PB3: 57.69 mm(2.27 in)
Weight: 
Printer only: 
PB2: 314 g (11.1 oz) 
PB3: 422 g (14.9 oz) 
Printer with battery & media roll: 
PB2: 472 g (16.7 oz) 
PB3: 583 g (20.6 oz) 

Power

Battery Type: 
Rechargeable 7.4V Li-Ion, 2200mAh. Battery rechargeable up to 8.5V.
Recharging Time: 
Approximately 180 minutes
AC Adapter: 
100 to 240 VAC @0.4A; meets CEC EPS
Endurance Per Fully Charged Battery: 
Endurance per fully charged battery at 25% print density: PB2: 256m (842 ft); PB3: 194m (636 ft)
Storage Temperature: 
4°C to 40°C (40°F to 104°F)

The Intermec PB2 is also known as the Intermec Technologies PB2 .