Intermec PB3 Portable Printer

Intermec PR 3 A newer version of this item is available.
It is replaced by the Intermec PR 3.
The ideal companion to Intermec worldclass mobile computers and scanners, the PB3 mobile three-inch printer interfaces seamlessly via Bluetooth or 802.11g with the CN3 and 700 Series handheld computers, as well as with the new Intermec CK3. The PB3 also has the ability to print from a wide range of handheld devices and smart phones to produce receipts on demand. Available with optional card reader, the PB3 gives workers the flexibility to accept payments via their mobile computer or their printer. Either way, the combination supports increased productivity and customer satisfaction, enabling workers to process payments on the go and generate receipts immediately.
Questions?
1-888-875-7170
We respond to every email
PB3 Options
Part # DescriptionAvailabilityPriceOrder
PB3A040E PR3, PB3A 802.11G RS-232 No Reader See Replacement Call for Details
PB3A021E PB3, Direct Thermal printing, 203 dpi, 2 ips, 2" width, RS-232 serial and Bluetooth interfaces, 1MB RAM/4MB Flash and magnetic stripe reader. Includes battery, AC charger, belt clip, media roll and cleaning pen. See Replacement Call for Details
PB3A020E PB3, Direct Thermal printing, 203 dpi, 2 ips, 2" width, RS-232 serial and Bluetooth interfaces, 1MB RAM/4MB Flash. Includes battery, AC charger, belt clip, media roll and cleaning pen. See Replacement Call for Details
PB3A020C PB3, A,BT-V,RS-232,NO READER,ENG/CHI(SIMP) See Replacement Call for Details
PB3A010E PB3A, IrDA, RS-232, NO READER, ENG/LAT See Replacement Call for Details
PB3A030E PB3, Direct Thermal printing, 203 dpi, 2 ips, 2" width, RS-232 serial and 802.11b wireless interfaces, 1MB RAM/4MB Flash and magnetic stripe reader. Includes battery, AC charger, belt clip, media roll and cleaning pen. Check Availability Call for Details

Intermec PB3 Details

Environment

Operating Temperature: 
-10°C to 50°C (14°F to 122°F)
Storage Temperature: 
-20°C to 60°C (-4°F to 140°F) without battery
Humidity: 
Operating humidity: 20% to 85% non-condensing 
Storage humidity: 5% to 95% non-condensing
Rain and Dust Resistance: 
IP54 with optional environmental case
Drop Spec: 
Survives 1.5m (5 ft.) drop to concrete 

Physical Characteristics

Length: 
PB2: 138.58 mm (5.46 in) 
PB3: 156.10 mm (6.14 in)
Width: 
PB2: 103.23 mm (4.06 in) 
PB3: 127.20 mm (5.01 in)
Height: 
PB2: 60.96 mm (2.40 in) 
PB3: 57.69 mm(2.27 in)
Weight: 
Printer only: 
PB2: 314 g (11.1 oz) 
PB3: 422 g (14.9 oz) 
Printer with battery & media roll: 
PB2: 472 g (16.7 oz) 
PB3: 583 g (20.6 oz) 

Power

Battery Type: 
Rechargeable 7.4V Li-Ion, 2200mAh. Battery rechargeable up to 8.5V.
Recharging Time: 
Approximately 180 minutes
AC Adapter: 
100 to 240 VAC @0.4A; meets CEC EPS
Endurance Per Fully Charged Battery: 
Endurance per fully charged battery at 25% print density: PB2: 256m (842 ft); PB3: 194m (636 ft)
Storage Temperature: 
4°C to 40°C (40°F to 104°F)

The Intermec PB3 is also known as the Intermec Technologies PB3 .