Photo of Motorola AN 200
Motorola logo

Motorola AN 200 RFID Antenna

The Motorola AN 200 RFID antenna can be used reliably in a wide range of indoor and outdoor environments, from the warehouse to the production line to the docking zone. Its rugged design withstands a range of environmental conditions from extreme heat and cold to moisture and vibration, making this antenna ideal for nearly any application. The AN 200 Antenna can be used in standard RFID applications at power levels of up to 1 watt and in customized applications at power levels up to 20 watts.

Category

AN 200 Options
Part # DescriptionAvailabilityPriceOrder
ANT-71721-01 AN 200, Antenna (Outdoor, Left) For The Ar400 and Xr400 Ships Today $261.98
AN2030 WHIP ANTENNA STUBBY DUAL BAND 802.11a/b/gN 2.4/5GHz RPSMA CONN Ships Today $20.08

Motorola AN 200 Details

The AN200 will perform reasonably well in EU frequency in most applications.
See footnotes for additional information 1

Performance Characteristics

Nominal impedance
50 Ohm

Power
20 watts (max. input)

Front to back ratio
<10 db

Frequency range2 
902-928 MHz

Gain
6.0 dBi linear

Axial ratio
<3 dB

Voltage Standing Wave Ratio (VSWR)
20 dB (1.22)

Physical Characteristics

Connector
Type "N" Female

Polarization
LHCP or RHCP

Single port
Yes

Dimensions (with mounting screws)
11.1 x 11.1 x 1.9 in. (28.19 28.19 x 4.83 cm) H x W x D

Weight
3 lbs (1.26 kg)

Connector position
Rear

User Environment

Temperature shock test
IEC-68-2-14 (-40° rising to 158° F/-40° rising to 70° C)

Humidity test
IEC-68-2-30 (77° to 104° F/-25° to 40°

Random vibration test
IEC-68-2-6 (10 to 150 Hz, 05 g, 1 hour in each of 2 axes)

Environmental sealing
IP54

Heat test
IEC-68-2-2 (158° F/70° C for 24 hours)

Salt fog test
IEC-68-2-11 (96 hours, repetitive cycling)

Outdoor use
Yes

Operating temperature
-40° to +149° F (-40° to +65° C)

Cold test
IEC-68-2-1 (-40° F/-40° C for 24 hours)

Rain test
IEC-68-2-18 (8 hours minimum in rain chamber at 43 psi)

Temperature shock test
IEC-68-2-14 (-40° F rising to 158° F (-40° C rising to 70° C) in 10 cycles of 60 minutes each)

Humidity test
IEC-68-2-30 (77° to 104° F (-25° to 40° C)), 24 hour cycles of 90% relative humidity

Impedance
DC: 10 kOhm +/- 5%