X
Product was successfully added to your shopping cart.

Continue Shopping

Symbol AP 300 Access Point

Symbol AP 300 Access Point

The Symbol AP 300 provides simultaneous wireless service to 802.11a, 802.11b and 802.11g mobile devices with high-bandwidth wireless connectivity at speeds of up to 54 Mbps in both the 2.4 GHz and 5.2 GHz ISM bands. The AP 300 requires no configuration or manual firmware maintenance. The Symbol Wireless Switch discovers Access Ports on the network and automatically downloads all configuration parameters and firmware. Installation, maintenance and troubleshooting costs are greatly reduced.
Discontinued - Need Assistance
See all options
  • 802.11i
  • 802.1x supplicant
  • 802.3af
  • Dual form-factors
  • Dual-radio 802.11a and 802.11g
  • Flexible mounting options
  • Interoperability
  • Load Balancing, Pre-Emptive Roaming and Rate Scaling
  • Multi-BSSIDs and Multi-ESSIDs
  • Thin Access Port design

AP 300Access Port

More Functionality for a Fraction of the Cost of Access Points

Access Ports are a key component of Symbol Technologies' award winning Wireless Switch System, the second-generation wireless LAN architecture that does more, yet costs less. Working in conjunction with Symbol's Wireless Switch 2000, theAP 300Access Port delivers robust and feature rich IEEE 802.11a/b/g connectivity. Access Ports substantially reduce the cost of deploying, implementing and managing a wireless LAN, while significantly increasing features, functionality and security of the wireless LAN infrastructure.

Virtual AP Enables True RF Virtual LANs (VLANs) for Better Device and Network Performance

With Virtual AP, each Access Port can support four separate wireless broadcast domains - functionality that would otherwise require the installation of four first-generation access points. These true wireless VLANs enable separation of mobile end-users, ensuring that broadcast traffic reaches only those recipients for which it is intended. Overall network traffic is reduced, network and device performance is improved, and device battery life is increased - at a fraction of the cost required to deliver the same functionality in a first generation access point-based network.

EachAP 300supports four BSSIDs (Basic Service Set Identifiers) and 16 ESSIDs (Extended Service Set Identifiers) per radio, enabling granular segmentation of the wireless LAN into multiple broadcast domains to meet specific enterprise needs. Typical access points support only one BSSID, utilizing ESSIDs (instead of BSSIDs) to create wireless VLANs.

Dual-radio 802.11a and 802.11g Design

Simultaneous service to 802.11a, 802.11b and 802.11g mobile devices provides high-bandwidth wireless connectivity at speeds of up to 54 Mbps in both the 2.4 GHz and 5.2 GHz ISM bands.

Thin AP Design

TheAP 300, as all other Symbol Access Ports, requires no configuration or manual firmware maintenance. The Symbol Wireless Switch discovers Access Ports on the network and automatically downloads all configuration parameters and firmware. Installation, maintenance and troubleshooting costs are greatly reduced.

Feature

Benefit

Dual form-factors

Plenum-rated external antenna model with metal housing is ideal for installation above ceiling tiles; the plastic internal-antenna housing allows for installation within the 'carpeted-space' and provides cost effective coverage via the integrated 2.4 GHz and 5.2 GHz antennas

Interoperability

Standards-based wireless, wired and security protocols ensure interoperability with third-party hardware

802.1x supplicant

Allows authentication to a RADIUS server to enable an 802.1x-protected Ethernet port

802.11h

Enables worldwide operation through support for standards-based dynamic frequency selection and power control

802.11i

Support for IEEE standards-based security protocols for strong Encryption (AES, TKIP), Authentication and Key Management (802.1x-EAP)

Flexible mounting options

Fast and easy installation with wall, ceiling and above-ceiling tile mounting options; internal antenna version snaps on to T-bars of suspended ceilings without the use of any hardware; external antenna version installs above ceiling tiles

802.3af

Simplifies and reduces total cost of installation through support of standards-based Power-over-Ethernet (PoE)

Load Balancing, Pre-Emptive Roaming and Rate Scaling

Increases reliability and resilience of the wireless network to support mission critical applications


Specification Highlights

Physical Characteristics

AP 300(internal antenna)

AP 300(external antenna)

Dimensions:

9.5 in. L x 7.0 in. W x 2.0 in. H
24.1 cm L x 17.8 cm W x 5.1 cm H

9.25 in. L x 5.75 in. W x 1.0 in. H
23.5 cm L x 14.6 cm W x 2.54 cm H

Weight:

1.0 lbs/0.45kg

1.6 lbs/0.73kg

Available Mounting Configurations:

Ceiling-Mount (to suspended ceiling T-bars below tile); Wall-Mount

Ceiling-Mount (above tile); Wall-Mount

Plenum Rated:

No

Yes, certified to UL 2043

LED Indicators:

2 LED indicators with multiple modes indicating 802.11a/802.11g Activity, Power, Adoption and Errors

Wireless Data Communications

Data Rates Supported:

802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9,11, 12, 18, 24, 36, 48, 54 Mbps

Network Standard:

802.11a, 802.11b, 802.11g

Wireless Medium:

Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM)

Uplink:

Auto-sensing 10/100Base-T Ethernet

Radio Characteristics

Frequency:

802.11b/g: 2.412 GHz to 2.484 GHz
802. 11a: 4.9 GHz to 5.875 GHz

FCC (US and Canada):

2.412 GHz to 2.462 GHz
5.150 GHz to 5.250 GHz (UNII -1); 5.250 GHz to 5.350 GHz (UNII -2);
5.725 GHz to 5.825 GHz (UNII -3); 5.825 GHz to 5.850 GHz (ISM)

EU:

2.412 GHz to 2.472 GHz
5.150 GHz to 5.250 GHz; 5.150 GHz to 5.350 GHz; 5.470 GHz to 5.725 GHz; (Country Specific)

Japan:

2.412 GHz to 2.484 GHz
4.900 GHz to 5.000 GHz; 5.150 GHz to 5.250 GHz

China:

2.412 GHz to 2.472 GHz

5.725 GHz to 5.850 GHz

Operating Channels:

802.11b/g: ETSI: 13; North America: 11; TELEC (Japan): 13
802.11a: ETSI: Country Specific; North America: 12; UNII I, II, III; (approval for 5.4-5.7 GHz pending); TELEC (Japan): 8

Nominal Transmitter Power:

802.11b/g:
17.5 dBm +/- 1 dBm @ 1, 2, 5.5, 11 Mbps
17.0 dBm +/- 1 dBm @ 6 and 9 Mbps
16.5 dBm +/- 1 dBm @ 12 and 18 Mbps
14.0 dBm +/- 1 dBm @ 24 and 36 Mbps
12.5 dBm +/- 1 dBm @ 48 and 54 Mbps

802.11a:
17.5 dBm +/- 1 dBm @ 6 and 9 Mbps
16.0 dBm +/- 1 dBm @ 12 and 19 Mbps
14.0 dBm +/- 1 dBm @ 24 and 36 Mbps
12.0 dBm +/- 1 dBm @ 48 and 54 Mbps

Receiver Sensitivity:

802.11b: 11 Mbps @ -84dBm; 5.5 Mbps @ -87dBm; 2 Mbps @ -88dBm; 1 Mbps @ -90dBm

802.11g: 54 Mbps @-68 dBm; 48 Mbps @ -70 dBm; 36 Mbps @ -75 dBm; 24 Mbps @-79 dBm
18 Mbps @ -81 dBm; 12 Mbps @-85 dBm; 9 Mbps @ -87 dBm; 6 Mbps @-88 dBm

802.11a: 54 Mbps @-68 dBm; 48 Mbps @ -70 dBm; 36 Mbps @ -75 dBm; 24 Mbps @-79 dBm
18 Mbps @ -81 dBm; 12 Mbps @-85 dBm; 9 Mbps @ -87 dBm; 6 Mbps @-88 dBm

User Environment

Operating Temperature:

32°F to 104°F/0°C to 40°C

-4°F to 122°F/-20°C to 50°C

Storage Temperature:

-40°F to 158°F/-40°C to 70°C

Operating Humidity:

5%-95% (non-condensing)

Operating Altitude:

8000 ft./2438 m

Storage Altitude:

15000 ft./4572 m

Electrostatic Discharge:

+/- 15 kV (Air), +/- 8 kV (Contact)

Power Specifications

Operating Voltage:

48 VDC @ 7W (Typical), 36 VDC to 57 VDC (Range)

Operating Current:

145mA @ 48VDC (typical)

Integrated Power Over Ethernet Support:

Standards-based IEEE 802.3af

Antenna Specifications

Type:

Integrated 2.4 GHz and 5.2 GHz Dual-Antenna Elements with diversity

Two RSMA and two RBNC connectors for external antennas (not included)

Band:

2.4 GHz to 2.5 GHz; 4.9 GHz to 5.850 GHz
(actual operating frequencies depend on regulatory rules and certification agency)

VSWR:

2.4 GHz: Less than 2:1
5.2 GHz: Less than 1.5:1

(antenna-specific)

Gain:

2.4 GHz: 0.0 dBi
5.2 GHz: 3.0 dBi

(antenna-specific)

Regulatory

Product Safety Certifications:

UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external Antenna)

Radio Approvals:

FCC (USA), Industry Canada, CE (Europe) and TELEC (Japan)

Extended Details
Refine Your Options
  1. Symbol AP 300 Access Point
    Part #: WSAP-5100-100-WW | SKU: SYM15314

    AP300 Access Port (802.11a+bg Access Port with External Antenna Connectors - Requires Antennas)
  2. Symbol AP 300 Access Point
    Part #: WSAP-5110-100-WW | SKU: SYM15315

    AP300 Access Port (802.11a+bg Access Port with Internal Antenna)
  3. Symbol WS 2000 Wireless Controller
    Part #: WS-2000-1C-ABG-WW | SKU: SYM15324

    WS 2000, Bundle: WS 2000 Switch and AP 300 Access Port (802.11a/g Access Port, Internal Antenna, Power supply, US Line Cord and Ethernet Patch Cable).
  4. Symbol AP 300 Access Point
    Part #: WSAP-5110-050-WW | SKU: SYM16970

    AP 300, Access Port (Single Radio, 802.11g with Internal Antenna).
  5. Symbol WS 2000 Wireless Controller
    Part #: WS-2000-2C-ABG-WW | SKU: SYM17668

    WS 2000, Bundle: WS-2000 and AP300 including 802.11a/b/g Switch, a-b-g Access Ports with Internal Antennas, US Line Cord and Ethernet Patch Cable.
  6. Symbol WS 2000 Wireless Controller
    Part #: WS-2000-2C-BG-WW | SKU: SYM17669

    WS 2000, Bundle: WS-2000 and AP300 including 802.11a/b/g Switch, b-g Access Ports with Internal Antennas, US Line Cord and Ethernet Patch Cable.
  7. Symbol WS 2000 Wireless Controller
    Part #: WS-2000-1C-ABG-WWR | SKU: SYM21658

    WS 2000, Bundle: WS 2000 Switch and AP 300 Access Port (802.11a/g Access Port, Internal Antenna, Power supply, US Line Cord and Ethernet Patch Cable).
  8. Symbol WS 2000 Wireless Controller
    Part #: WS-2000-2C-BG-WWR | SKU: SYM21659

    WS 2000, Bundle: Qty 1 WS2000 and Qty 2 802.11b/g Access Ports (AP300 / Internal Antenna, includes power supply and US line cord). This item cannot be ordered in the US or Canada. Please Call for more details.
  9. Symbol WS 2000 Wireless Controller
    Part #: WS-2000-2C-ABG-WWR | SKU: SYM26502

    WS 2000, Bundle: Qty 1 WS2000 and Qty 2 802.11a/b/g Access Ports (AP300 / Internal Antenna, includes power supply and US line cord). This item cannot be ordered in the US or Canada. Please Call for more details.
  10. Symbol AP 300 Access Point
    Part #: WSAP-5100-050-WWR | SKU: SYM26513

    AP300 Access Port (Single Radio, 802.11g Only with External Antenna Connectors)

Items 1 to 10 of 21 total

Page:
  1. 1
  2. 2
  3. 3

Recommended Accessories for Model: Symbol AP 300 Access Point

Recommended Warranties for Model: Symbol AP 300 Access Point

Can We Help?

Get instant answers to all your product questions.
We love to talk about barcoding!

Chat Now