X
Product was successfully added to your shopping cart.

Continue Shopping

Access Point: Wi-Fi, Wireless, Indoor, Outdoor

Barcode Giant has a full line of wireless access points to offer a broad range of both indoor and outdoor solutions that support today's most-demanding networks. Regardless of whether you’re supporting a small office or an arena, let Barcodes Inc be your #1 source for your Wi-Fi or WLAN needs.

31 to 40 of 264 Total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  1. Cisco Aironet 1550 Series Access Point

    Extend high-performance connectivity to the outdoors with the next-generation Cisco Aironet 1550 Series wireless access point. This series is based on Cisco 802.11n technology with integrated silicon-level spectrum intelligence to detect, classify, and mitigate RF interference. This outdoor wireless mesh access point offers many advantages.
  2. Cambium Networks PMP 320 Access Point

    The Cambium-Networks PMP 320 is an all-outdoor, integrated, single-board radio. This simple design is fast and easy to install with low power requirements and no requirement for the controlled environments associated with circuit boards. The PMP 320 offers full MIMO Matrix B support, with up to 45 Mbps of throughput in a 10 MHz channel, up to 65,000 Packets per Second (PPS) and long range, LOS and nLOS performance for business and residential connectivity in the 3 GHz licensed band. Designed for fixed outdoor applications to inter-operate with WiMAX CPEs, the PMP 320 does not require the costly ASN gateway equipment associated with mobility functions.
  3. Cambium Networks PTP 100

    The Cambium-Networks PTP 100 Series of Point-to-Point wireless Ethernet bridges provide a low-cost-of-entry solution for deployment, expansion and extension of broadband communications networks. The PTP 100 Series also offers the scalability of simple, affordable software key- based license upgrades for additional performance and capacity as networks grow.
  4. Cambium Networks PTP 500

    The Cambium-Networks PTP 500 Ethernet microwave radios are designed to provide the connectivity and backhaul needed to achieve communication goals. In non-line-of-sight (NLOS), long-distance line-of-sight (LOS) and high-interference environments, over water and desert terrain, and through severe weather conditions, the PTP 500 radios transport information quickly, reliably and securely.
  5. Cambium Networks PTP 800

    The Cambium-Networks PTP 800 solutions are designed to satisfy the demand for reliable, high-throughput, and secure Internet Protocol (IP-based) licensed-microwave communications at an affordable price. The PTP 800 series includes two equipment architectures: split-mount and all-indoor. The solutions are designed to provide connectivity and backhaul for a broad array of applications, while giving users the flexibility to choose the architecture that best meets tower and facility considerations. The PTP 800 solutions offer the highest transmit power and system gain in their category, enabling the radios to transmit reliably over distances up to 50 miles (80 km) in a single hop.
  6. Cambium Networks PMP 100

    The Cambium-Networks PMP 100 combines field-proven toughness with exceptional performance, security, ease-of-use and cost effectiveness. Modules are available with total throughputs up to 14 Mbps and are available in frequencies from 900 MHz to 5 GHz. Join the tens of thousands of network operators who have deployed PMP 100 solutions.
  7. Cambium Networks PMP 400

    The Cambium-Networks PMP 400 offers high performance in the 4.9 GHz band. Municipalities, counties and local governments need reliable, high-quality broadband connectivity that is rapidly deployed. The PMP 400 provides up to 20 Mbps of useable throughput in a 10 MHz channel. OFDM technology enables near line of sight connectivity for difficult to reach locations.
  8. Motorola AP 622 Access Point

    The Motorola AP 622 is a dependent dual radio access point designed to lower the cost of deploying and operating a secure, reliable 802.11n wireless LAN. The access point features dual MIMO radios and a GigE WAN uplink port. One radio can be used for client access while the second radio is used for simultaneous client access on a different frequency band or as a dedicated sensor on both 2.4 and 5.0 GHz bands for security and troubleshooting. WiNG 5 intelligence ensures traffic is locally forwarded along the most efficient paths without sacrificing QoS and security is implemented at the access point itself. Out-of-the-box, the AP 622 access point supports voice over wireless LAN (VoWLAN) QoS, which ensures toll-quality even with many simultaneous VoWLAN calls on a single access point.
  9. Cambium Networks PMP 430 Access Point

    The Cambium-Networks PMP 430 Access Point and Subscriber Module is the ideal solution for developing, enhancing and extending advanced broadband networks with more than 50 Mbps of total aggregate throughput for data transfer, voice and video applications. Because of GPS Synchronization, Access Points can be co-located on the same tower location with other Cambium PMP. Subscriber Modules can be purchased with throughputs of 4, 10, 20 or Uncapped Mbps and throughput can be enhanced to existing modules via a fixed software license.
  10. Cambium Networks Canopy PMP 450 Access Point

    Utilizing 2x2 MIMO-OFDM technology, new deployments can take advantage of Cambium-Networks proprietary feature set, while achieving data rates higher than 90 Mbps. From the available synchronization options to its diverse feature set, the Canopy PMP 450 provides flexible deployment options that make it a good fit for high capacity, high reliability networks.

31 to 40 of 264 Total

per page
Page:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6

Top Brands for Access Point: Wi-Fi, Wireless, Indoor, Outdoor

Can We Help?

Get instant answers to all your product questions.
We love to talk about barcoding!

1-800-874-0996
Barcode Giant