- Barcoding
- Printing
- Mobile Computing
- RFID
- POS Equipment
- Wireless
- 1-800-874-0996
Navigation
Additional Information
| Manufacturer | Cisco |
|---|---|
| Model Name | Parts |
| Product Condition | New |
General Information
- Product Type: Switching Module
- Brand Name: Cisco
- Manufacturer: Cisco Systems, Inc
- Product Name: Switching Module
Technical Information
- Application/Usage: Switching Network
Physical Characteristics
- Dimensions: 1.6" Height x 7.1" Width x 7.2" Depth
Interfaces/Ports
- Interfaces/Ports: 1 x T3/E3 WAN
- Interfaces/Ports Details: 1 x BNC Female T3/E3 Network Full-duplex WAN
Other
- Compatibility:
- Supported Platforms & Minimum IOS Versions:
- 3745 - 12.2(11)YT
- 3725 - 12.2(11)YT
- 3660 series - 12.2(11)YT
- 3640 - Not Available
- 3620 - Not Available
- 2691 - 12.2(11)YT
- 2650 - Not Available
- 2600XM Series - 12.2(11)YT
- 2600 series - Not Available
- 1720 - Not Available
- 1600 series - Not Available
- Supported Platforms & Minimum IOS Versions:
- 3745 - 12.2(11)YT
- 3725 - 12.2(11)YT
- 3660 series - 12.2(11)YT
- 3640 - Not Available
- 3620 - Not Available
- 2691 - 12.2(11)YT
- 2650 - Not Available
- 2600XM Series - 12.2(11)YT
- 2600 series - Not Available
- 1720 - Not Available
- 1600 series - Not Available
- System Requirements:
- Single-wide network module, no slot restrictions<br><br> Minimum Cisco IOS Software Requirements:
- Cisco IOS Software Version 12.2(11)YT
- Additional Information:
- DSX3 level interface with dual female 75-ohm BNC coaxial connectors per port (separate RX and TX)
- Scrambling and subrate support of major DSU vendors
- Line build-out - Programmable for up to 450 feet of 734A or equivalent coaxial cable or up to 225 feet for 728A or equivalent coaxial cable
- C-bit, or M23 framing for T3, bypass and G.751 framing for E3 (software selectable)
- Binary 3-zero substitution (B3ZS) (T3) or high-density bipolar with three zeros (HDB3) (E3) line coding
- Support for 16- and 32-bit CRC (16-bit default)
- DS3 FEAC channel support
- Twenty-four-hour history maintained for error statistics and failure counts
- DS3 alarm and event detection (once per second polling)
- Alarm indication signal (AIS)
- Out of frame (OOF)
- Line code violation (LCV)
- Excessive zeros (EXZ)
- Far-end receive failure (FERF)
- Line and payload loopback capabilities
- DS3 remote-line loopback (via Far End Alarm and Control [FEAC] codes per American National Standards Institute [ANSI] T1.107a)
- Response to embedded loopback commands
- Insertion of loopback commands into transmitted signal
- Programmable pseudorandom pattern up to 32 bits long, including 223, 220, 215, 1s, 0s, alt-0-1
- 32-bit error count and bit-count registers
- Alarm detection - Alarm indication signal (AIS), remote alarm, far-end block error (FEBE), out of frame (OOF)
- Onboard processor for Maintenance Data Link (MDL)
- Physical space savings - Eliminates the need for external DSU device, saving valuable rack space
- Software-configurable T3/E3 - Provides the flexibility to deploy a single module worldwide<br><br> Serial Encapsulations:
- HDLC
- PPP
- Frame Relay
- ATM Data Exchange Interface (ATM-DXI)
Management & Protocols
- Management: Eliminates the need for two separate monitoring tools
- Protocols:
- TCP/IP
- VoIP
- HDLC
- Frame Relay
- PPP
Controls/Indicators
- Status Indicators:
- CD
- LP
- AIS
- FERF
- EN
- Alarm
Media & Performance
- Data Transfer Rate:
- 44.74 Mbps T3 Half/Full-duplex
- 34.37 Mbps E3 Half/Full-duplex
- Connectivity Media: 75-ohm Coaxial T3/E3
Environmental Conditions
- Humidity: 10% to 90% Non-condensing Relative Humidity
- Temperature:
- 32°F (0°C) to 104°F (40°C) Operating
- -4°F (-20°C) to 149°F (65°C) Storage
Warranty
- Limited Warranty: 90 Day
