Fast Digital Response – Speeds processing time
that results in improved throughput and increased
productivity.
Simple to Use – Reduces operator training
time.
DuraBridge® Technology – Reduces overall scale
deflection when a full load is applied.
Resident Display – Front mounted, 1/2" H,
six-digit LCD display.
Large Weigh Platters – Easily accommodates
oversize parcels or containers.
Versatile – Can be set up in either decimal
pounds or kilogram mode.
Construction – Stainless steel weigh platter.
Painted mild steel base enclosure.
RS-232 Cable – DB-9 pin female connector
allows you to connect to a PC.
Controls – ZERO: With auto zero tracking for
zeroing the scale. TEST: Runs a diagnostic program to assure scale
is fully functional.
I/O Port – Allows for connection to a computer
or smart terminal. Uses standard PC cable to 9-pin "D" connector on
scale. RS-232, bidirectional, configurable 1200 - 19.2K baud.
Transmits weight and scale status whenever ASCII "W" <CR>" is
sent by a remote device. High resolution "H" command accesses
increased resolution.
Power Supply – Recessed power supply with
standard wall plug.
Specifications
Options
Capacity and Resolution:
250 lb x .05 lb or 100 kg x .02 kg 300 lb x
0.1 lb or 150 kg x .05 kg Weight classifier or
scale configurations available in setup.Shipping Weight: 108 lbs
(Standard Configuration) 125 lb (With
Ball-Top) Platter Size:
24" x 24" Power:
120 VAC (+10%-15%), 60 Hz, standard 3-wire ground.
Agency Approvals: United
States: NTEP #95-121 Canada: MOI #AM-5099 Rev. 1 For use as a Class
III Device from +5ºC through 40ºC Operating
Environment: 42ºF to 104ºF (5ºC to 40ºC),
10% to 95%, RH (non-condensing)
Ball-Top Weigh Platter – Simplifies transport
of all parcels. Ideal for conveyor lines. One piece lift-off design
equipped with 48 balls.
Remote Display – Six-digit LCD housed in a
molded enclosure with a 7-ft. cable.
Display Tower – 12" tower for remote
display.
International Power Supply – 230 VAC, 50 Hz
power supply. End of cable terminated with a universal
conductor.