X
Product was successfully added to your shopping cart.

Continue Shopping

RJS Inspector D4000 Auto Optic and Laser Barcode Verifier

RJS Inspector D4000 Auto Optic and Laser Barcode Verifier

This easy-to-use unit is a true single unit solution, offering one-handed operation and support of all popular linear symbologies. The RJS Inspector D4000SP also offers store and print capability, multiple scan averaging, and sub-symbology choices - all easily accessible through a simple four-button user interface.
Starting at: $2,629.87
See all options
  • 4-line LCD
  • 5 LEDs - indicate average bar deviation (both modes)
  • Audible tones indicate pass/fail results, low battery
  • Auto-discrimination between symbologies
  • Bi-directional scanning
  • Multiple scan averaging
  • Simple 4 button: On, Print, Select, Enter
  • Store and Print capability

Dual Mode Portable Bar code Verifier

For NIST traceable ANSI method and/or laser point-and-shoot type operation, the Inspector Model D4000 adapts to practically any linear bar code verification application requiring a portable unit.

The D4000 offers the ease of point-and-shoot traditional verification with the laser optic and the most flexible ANSI method verifier with the patented Auto-Optic. Choose the laser optic, the Auto-Optic or both. Whichever method is best for you, the D4000 provides flexibility. Use the laser optic for cylindrical products, easily wrinkled or scratched surfaces and wet ink. Use the Auto-Optic for exacting ANSI method verification. This patented device gives the user a choice of two light sources and four apertures through its easy to use front panel. You can meet practically any application with the D4000 from RJS.

ANSI Mode Operation

A D4000 incorporating an Auto-Optic scanner is the industry’s most flexible ANSI method verifier. Eight optical arrangements are possible via menu selections for four aperture sizes and two wavelengths of light. The optical geometry meets all requirements of the ANSI X3.182 Bar code Quality Guideline.

The Auto-Optic scanner is designed and manufactured by RJS for the sole purpose of performing ANSI method bar code quality analysis. Repeatability between units is outstanding, making the D4000 an ideal choice as a standardized company-wide ANSI method verifier.

Laser Mode Operation

A D4000 incorporating a laser scanner is an extremely easy to use point-and-shoot verifier. It requires virtually no user training and analyzes most of the essential traditional verification parameters. It also provides the ANSI method Decodability calculation and percent of decode information.

Popular applications include verification on materials requiring special considerations such as shiny, curved or uneven surfaces and wet ink.

The Model D4000 Provides the Two Most Popular Types of Verification; ANSI Method and/or Point-and-Shoot Traditional Method

This unique portable bar code verifier can interface with either the patented RJS Auto-Optic scan head or a laser scanner to provide nine different optic configurations. The scanners are easily installed by the user, which makes the unit quickly adaptable to practically any verification requirement.

ANSI Mode Operation

A D4000 incorporating an Auto-Optic scanner is the industry’s most flexible ANSI method verifier. Eight optical arrangements are possible via menu selections for four aperture sizes and two wavelengths of light.  The optical geometry meets all requirements of the ANSI X3.182 Bar code Quality Guideline.
The Auto-Optic scanner is designed and manufactured by RJS for the sole purpose of performing ANSI method bar code quality analysis. Repeatability between units is outstanding, making the D4000 an ideal choice as a standardized company-wide ANSI method verifier.

Laser Mode Operation

A D4000 incorporating a laser scanner is an extremely easy to use point-and-shoot verifier – basic scanning instructions are placed on the scanner. It requires virtually no user training and analyzes most of the essential traditional verification parameters.  It also provides the ANSI method Decodability calculation and percent of decode information.

Popular applications include verification on materials requiring special considerations such as shiny, curved or uneven surfaces and wet ink. High density codes with X dimensions as narrow as 5 mil (.13 mm) can be also analyzed.

GENERAL SPECIFICATIONS - Model D4000

Modes of Operation

  • ANSI Mode; all ANSI method parameters, application compliance, plus traditional analyses
  • Laser Mode; traditional parameters (except reflectance), data comparison, percent decode

Symbologies

  • Code 39; USS, w/mod43, AIAG B-1, B3/4/5/10, LOGMARS, HIBC
  • UPC/EAN including 2 and 5 digit supplemental codes
  • Code 128; USS, UCC/EAN 128 (see Unique ANSI and Laser Mode Features)
  • USS Codabar
  • Interleaved 2 of 5; USS, Case Code, w/ Mod 10 Check Digit

Features

  • Auto-discrimination between symbologies
  • Store and Print capability
  • Bi-directional scanning
  • Multiple scan averaging

 

User Interface

  • Simple 4 button: On, Print, Select, Enter
  • 4-line LCD
  • 5 LED’s - indicate average bar deviation (both modes)
  • Audible tones indicate pass/fail results, low battery

Optional Accessories

  • Printer: TP140A
  • Battery charger (can be AC power supply w/batteries out of unit)

Unique ANSI Mode Features

  • Auto-Optic Scanner: Two available models; 3, 5, 10, 20 mil or 3, 6, 10, 20 mil
  • Two light wavelengths: 660 and 925 nm
  • UCC/EAN 128 Application Identifier (AI) data format check; AI 00 and 01 only

Unique Laser Mode Features

  • Percent of Decode displayed on lower two LCD lines (Continuous setting only)
  • UCC/EAN 128 Application Identifier data format check; all AI per current specifications
  • Store and print and/or database capability; 20K bytes non-volatile memory programmable in 5K byte segments

Product Applications

D4000 w/ Laser Optic
  • Bar codes on curved surfaces
  • Bar codes on easily wrinkled or scratched surfaces
  • Wet ink
  • Codes that are short in height (<= ¼")
  • UCC/EAN codes where AI and data formats must be analyzed
  • Data match
  • May use for analyzing symbols printed on a laser printer but must pay special attention to the ANSI decodability grade
D4000 w/ Auto- Optic
  • Portable verifier for screening codes printed on thermal or laser printers
  • Shipping codes direct marked on corrugated material (use 10 and 20 mil aperture depending on code type per UCC spec)
  • Codes with Large (> 25-mil) X dimension
  • Verify using IR light
  • Printing codes with multiple sized X dimension
  • Measure reflectance of material
  • UPC codes on flat surfaces (use 6-mil optic)
D4000 - Both Optics
  • General verification device for ISO 9000 companies
  • Verify using IR light
  • Data match
  • Want common users to have ease of point and shoot but need QA personnel to have full ANSI
  • Measure material reflectance
  • Portable verifier for screening codes printed on thermal or laser printers
Extended Details
Refine Your Options
  1. RJS Inspector D4000 Auto Optic Barcode Verifier
    Part #: 002-7850 | SKU: RJS7300

    Barcode Verifier, RJS Inspector D4000, Auto-Optic (3,6,10,20 mil), Reflectometer Mode, Automatic Power Off, 4 Line x 8 Character LCD Display, 4-Button Keypad, Ideal for customers needing Full ISO/ANSI barcode quality testing in North America.
    $2,700.00
  2. RJS Inspector D4000SP Barcode Verifier
    Part #: 002-7851 | SKU: RJS7301

    Inspector D4000 Portable Barcode Verifier with Laser Scanner - Worldwide. Ideal for customers who want point and shoot and accept PARTIAL ISO/ANSI barcode quality testing worldwide. Report printer (P/N 002-9018) sold separately.
    $2,700.00
  3. RJS Inspector D4000 Auto Optic and Laser Barcode Verifier
    Part #: 002-7848 | SKU: RJS7298

    Combo (3,6,10,20 mil and Laser) - North America. Ideal for high volume production environment when FULL ISO/ANSI AND PARTIAL spot testing barcode quality testing in North America.
    $3,500.00
  4. RJS Inspector D4000 Auto Optic and Laser Barcode Scanner
    Part #: 002-7847 | SKU: RJS7296

    Combo (3, 5, 10, 20 mil and Laser) - European version. Ideal for high volume production environment when full ISO/ANSI and partial spot testing barcode quality testing.
    $3,500.00
  5. RJS Inspector D4000 Auto Optic Barcode Verifier
    Part #: 002-7849 | SKU: RJS7299

    Inspector D4000, Auto Optic (3,5,10,20 mil) - Europe and Asia. Ideal for customers needing FULL ISO/ANSI barcode quality testing in Europe and Asia.
    $2,700.00

5 Item(s)

Recommended Accessories for Model: RJS Inspector D4000 Auto Optic and Laser Barcode Verifier

  • RJS Accessory
    Part #: 002-5262 | SKU: RJS217376

    Stand, Tilt Handheld. Bent metal stand that attaches to the D4000/I-4000/L-1000 verifier body (display).
    Price: $25.00
  • RJS Inspector 2000 Accessory
    Part #: 002-6773 | SKU: RJS7283

    TP140A Verifier Cable. Replacement TP140 and TP140A printer cable.
    $60.00
  • RJS Inspector 2000 Accessory
    Part #: 002-1425 | SKU: RJS7285

    Battery Charger, 110V. Compatible with D4000, I-4000, or L-1000 bar code verifiers. Can be used with or without NiCad batteries.
    $68.00
  • RJS Inspector D4000
    Part #: 002-5564 | SKU: RJS142805

    Manual, Inspector 4000
    $92.00
  • RJS Inspector D4000
    Part #: 002-5568 | SKU: RJS142806

    Manual, L1000
    $92.00

Can We Help?

Get instant answers to all your product questions.
We love to talk about barcoding!

Chat Now